Index of Products

search is an entry of the index, Satimage may have a solution suitable for you: contact us.
Application links are marked by blue text.
The index contains all Satimage’s brands.
A-C
2D dimensional measurements
high accuracy (a few µm) measurements on flat faces < 50 mm (2 inches)
3D scanning, 3D inspection
long products, width < 200 mm (8 inches)
edges of cut blanks
BarMonitor
monitoring of the straightness of bars during straightening
automation of a straightening station
Bavurex
measurement and control of burrs and fins
burr
measurement of the height
butt-welded joint
inspection of the shape
inspection of the gap
tracking
Brillo
inspection on the fly of micro-roughnesses
D-F
die < Ø 40 mm (1.5 inch)
check of the diameters
Diffuso
inspection of the smooth surfaces
filtering screens
on-line inspection
inspection of the finished product
FireVision
Inspection Engine
flatness of surfaces
very accurate inspection
G-K
gloss
see “haze”
grid
on-line inspection
inspection of the finished product
haze & gloss
inspection on the fly
KitNum
automation of the operation of profile projectors
L-P
laser butt-welding
inspection of the position of the blanks
inspection of the alignement of the laser
inspection of the focus of the laser
inspection of the straightness of the blanking
inspection of the straight cut edge
inspection of the welded seam
mechanical tests
small strains measurement
small displacements measurement
micro-roughness
on-line inspection
positioning
motion servo-control
guiding
PPM
video-profile projector for automated 2D measurements
profile, rolled or extruded
on-line inspection
inspection of the cross-section
profile projector
automation of the readings
profile recording
width < 200 mm (8 inches)
Profilo
real-time inspection of long products & profiles

Q-S
RECTA-Bar
inspection of the straightness of bars, rods, tubes, profiles
RECTA-Basic
inspection of the straightness of the cut of blanks
RECTA-Blade
inspection of the straightness of the cutting blades
RECTA-Profile
inspection of the straightness, squareness and shape of the cut of blanks
scan
fast 3D surface scan
Seam-Inspector
check of the position of the edges before laser butt-welding
SLOTS
on-line inspection of the openings of filters
inspection of the openings of finished filters
servo-control of the winding
smooth surfaces
very accurate check of the flatness
very accurate check of the sphericity
detection of very small defects
measurement of gloss and haze
straightness
of bars
of cutting blades
of edges
… and squareness of cut edges
while straightening
off line
rods
tubes
surface brightness
inspection on the fly
surface defects
on smooth surfaces
surface finish
on-line inspection
SurfLab-3D
fast 3D scanning
T-Z
tapped holes
fast inspection
Tarodo
tapped holes fast inspection
threads
threads count in tappings
tubes < Ø 40 mm (1.5 inch)
inspection of the cross-section
welding
inspection of the welded seam
Weld-Inspector
check of the alignment of the laser (butt-welding)
check of the focus of the laser (butt-welding)
quality inspection of the welded seam
winding
on-line inspection
wire drawing
on-line accurate check of diameter

Leave a Reply

Your email address will not be published. Required fields are marked *